I tried to load the latest firmware and it failed, now when i open up RKBatchtool under connected devices the number one box is coloured blue. Home» Blog» Reflashing in MASKROM mode for RockChip devices . short on pins 8 and 9 of the nand, it now fails to "download IDB start". Preparing IDB failed. 3 Linux To flash the tahrfoundation.org, you need to use the RKBatchTool and to flash the partitions, you will need to use.

After it, i get in RKBatchTool ERROR, after it i try "Restote" button My box is called V88 and the circuit board looks the same as on the pictures here. right firmware it will probably work and I will not get the IDB fail problem?. Page 1 of 2 - Drivers, RK tool, rkbatchtool, firmware. mode it, but I can't flash anything (test device failed) or erase the IDB (IDB erasing failed). Preparing IDB failed. 3 Linux To flash the tahrfoundation.org, you need to use the RKBatchTool and to flash the partitions, you will need to use. When updating/flashing a message: Download IDB Fail was shown and the button went red. Take a look at theese pictures. Where i'm wrong. Unbrick Rock. Is it bricked? When writing tahrfoundation.org to nand RKBatchTool failes with following message: "Prepare IDB Fail" (or similar error messages like "IDB. Rockchip Batch Tool Firmware Fail Download IDB Fail. Flash method: 1, Open the “tahrfoundation.org” in the BatchTool file, on the top, you. Home» Blog» Reflashing in MASKROM mode for RockChip devices . short on pins 8 and 9 of the nand, it now fails to "download IDB start". I tried to load the latest firmware and it failed, now when i open up RKBatchtool under connected devices the number one box is coloured blue.